10
Lowes.com/harborbreeze
FINAL INSTALLATION
4. Align the preassembled blade screw posts (J) on
blade arms (S) with the holes on a blade (G).
Press up on the blade arm firmly so the blade screw
posts (J) come through the holes in the blade (G),
then slide a three-C clip (BB) onto each blade
screw post (J).
Repeat for each blade arm (S) and blade (G).
WARNING
: To reduce the risk of personal
injury, make sure the friction detents on three-C clip
(BB) face down and recessed groove faces up.
Slide three-C clips (BB) completely under blade
screw posts (J) so edges of blade screw posts (J)
are captured by the recessed groove on the three-C
clips (BB).
BB
G
Friction
Detents
Recessed
Groove
4
X
J
J
BB
BB
Three-C clip x 3
Hardware Used
NOTE:
To install the fan without the light kit, proceed to INSTALLING FAN WITHOUT LIGHT KIT on
page 12.
S
Should it become necessary to remove blade arm (S)
from motor housing (D), follow these steps:
Remove blade arm screws (T) and washers (U) from
underside of motor housing (D) and remove blade arm
assembly. Remove safety screw (V) and metal tab (W)
from blade arm wall. Twist blade arm (S)
counterclockwise to remove from blade arm wall.
To reinstall blade arm (S), reattach metal tab (W) to
blade arm wall with safety screw (V). Reattach blade
arm wall to motor housing (D) with blade arm screws
(T) and washers (U). Refer to step 2 on previous page
to reinsert blade arm (S).
3.
3
D
S
S
T
U
W
V
