![background image](http://html.mh-extra.com/html/harbor-breeze/e-am54ai5lkl/e-am54ai5lkl_manual_596213010.webp)
10
Wrap electrical tape around each individual wire
connector (CC) down to the wire as shown in Fig. 2.
WARNING:
Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
IMPORTANT
: Using a full range dimmer switch to
control fan speed will cause a loud humming noise
from fan. To reduce the risk of fire or electrical
shock, do NOT use a full range dimmer switch to
control fan speed. (Fig. 3)
CC
CC
2
CC
CC
E3 Wire Connector x4
3
1
2
3
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
2.
Hardware Used
3.
WIRING
1C.
FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES:
If you intend to control the fan
and light with separate wall switches, connect
BLACK
wire from fan to
BLACK
wire from the
independent wall switch for the fan. Connect
BLUE
wire from fan to the
BLACK
wire from the other
independent wall switch for the light. Connect
WHITE
wire from fan to
WHITE
wire from ceiling.
Connect all
GROUND
(
GREEN
) wires together
from fan (on downrod and mounting bracket) to
BARE
/
GREEN
wire from ceiling. (Fig. 1C)
Note:
Black wire is hot power for fan. Blue wire is hot
power for light kit. White wire is common for fan and
light kit. Green or bare wire is ground.
WHITE
BLACK (WALL SWITCH)
BLACK (WALL SWITCH FOR LIGHT)
GROUND/GREEN (BARE)
BLACK
BLUE
WHITE
FROM FAN
FAN
120 V Power
FROM
CEILING
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES
GREEN
WHITE
1C
GREEN