6
INITIAL INSTALLATION INSTRUCTIONS
1. Turn off circuit breakers and wall switch to the fan
supply line leads.
2.
Choose the desired mounting method:
3. Check existing outlet box (not included) to ensure it is
securely fastened to at least two points in a structural
ceiling member and can support the full weight of
)
A
(
t
e
k
c
a
r
b
g
n
it
n
u
o
m
ll
a
t
s
n
i
,
d
e
ifi
r
e
v
e
c
n
O
.
n
a
f
e
h
t
to
the outlet box using the screws and washers provided
with the outlet box.
Note:
If using the angle mount, make sure open end
of mounting bracket (A) points toward the ceiling.
DANGER:
Failure to disconnect power supply
prior to installation may result in serious injury or
death.
DANGER:
A loose outlet box can cause the
fan to wobble and increase the fan’s potential to fall,
which could result in serious injury or death.
A. Standard Mounting:
Standard mounting is best suited for ceilings 8 feet.
or higher. For taller ceilings you may want to use a
longer downrod (not included).
B.
C.
Angle Mounting:
Angle-style mounting is best suited for angled or
vaulted ceilings. A longer downrod is sometimes
necessary to ensure proper blade clearance. If
using the angle mount, make sure the ceiling angle
is not steeper than 20°.
Flush Mounting:
Flushmount installation is used for ceilings less
than 8 feet high.
Lowes.com/harborbreeze
A
B
C
2
3
Standard/Flush
Mounting
A
Angle
Mounting
A
For ALL mounting options, there must be at least
30 inches from the blade tip to nearest wall. Also,
ensure there is 7 feet from the bottom edge of the
blade to the floor.
or
T
Turn Off Power Source
1
