Harbor Breeze CPW1413 Скачать руководство пользователя страница 15

15

OPERATING INSTRUCTIONS

Note: 

3. When the season changes, you may want to change

the direction in which the fan spins.

In warmer weather, counterclockwise rotation creates

a downward 

 which cools the air. Push the

switch LEFT and see a SUN icon.

In cooler weather, clockwise rotation creates an

upward 

which moves hot air from the ceiling.

Push the switch RIGHT and see a SNOWFLAKE icon.

: 

 

 

the reverse switch.

Use a small screwdriver or ballpoint pen to 

move the reverse switch if you have

 doing

so by hand.

3

Lowes.com/harborbreeze

2. The buttons on the remote from the power kit (M)

control the fan speed and light as follows:

Note: 

This receiver has a preset memory function;when 

the switch is turned OFF, the control will remember the 

light intensity and fan speed. When the switch is turned 

back ON, the light and fan will resume operation as they 

 were prior to the switch being turned OFF. 

Low speed
Medium speed
High speed
Turn the fan off
Press the light key quickly and turn the light ON or OFF.

Press and hold to dim the light. 

The light will cycle from bright to dim to bright until 

button is released. 

R

2

1. Remove battery door from the remote in the power

kit (M) and insert battery also from power

kit (M). 

            Ensure the polarity of the battery matches the

polarity 

             indicated in the battery compartment of

remote, then replace battery door.

        CAUTION: 

If you are not expecting to use the 

remote for a long period of time, remove the battery 

to prevent damage to the remote. Be sure to store the 

remote away from excess heat or humidity.

O

N

D

IP

Battery Door

Remote

Battery

1

Содержание CPW1413




















Отзывы: