NOTE:
Flushmount installation will not use the downrod
assembly (B), canopy cover (D) or coupling cover (E).
1. Loosen (but do not remove) the two mounting bracket
screws preassembled on mounting bracket (A) that align
with the slotted holes on canopy (C). Remove the other
two mounting bracket screws. Lift canopy (C) up so
slotted holes engage loosened screw heads on mounting
bracket (A), then twist canopy (C) clockwise. Re-install
previously removed mounting bracket screws, then
tighten all screws securely.
Note:
If the canopy cover (D) is loose during installation,
please press it to the inner edge of the canopy (C).
FINAL INSTALLATION INSTRUCTIONS
2. Position one blade holder (G) under blade (H). Insert
three blade screws (AA) through blade (H) and into
blade holder (G). Tighten each blade screw (AA) evenly,
starting with the center screw.
Repeat for the remaining blade assemblies.
Hardware Used
Blade Screw
x 15
AA
Hardware Used
Motor Screw
x 10
12
Lowes.com/harborbreeze
G
H
AA
2
3. If present, remove and discard the preassembled plastic
motor blocks but remain the motor screws (BB) from
motor housing (F). Position one completed blade
assembly under motor housing (F), aligning the holes in
blade holder (G) with those in motor housing (F). Secure
blade assembly using motor screws (BB), tightening by
hand only.
Repeat this step for the remaining blade assemblies.
BB
C
A
Screw
C
A
Screw
1
D
3
BB
Shipping Block
BB
F
G
BB
