14
Connect WHITE wire from light kit fitter (F) to
WHITE wire from switch housing. Connect BLACK
wire from light kit fitter (F) to BLUE (or BLACK) wire
from switch housing. Make sure that molex
connections are secure.
Align holes in switch housing cap (U) with holes in
switch housing.
Note:
Make sure to align notch on
top edge of the switch housing cap (U) with the
reverse switch on switch housing for the correct fit.
Re-insert the switch housing screws (S) previously
removed (Step 4, page 13), then tighten all switch
housing screws (S) with a Phillips screwdriver.
6.
7.
FINAL INSTALLATION
Install bulbs (Q).
IMPORTANT:
When you need to replace bulbs,
please allow the bulb(s) and glass shade to cool
down before touching them.
8.
Lowes.com/harborbreeze
Thread preassembled fan and light pull chains
through corresponding pull chain guides on the
outer rim of the light kit fitter (F).
Align slots on glass shade (I) with protrusions on
the inside of the light kit fitter (F). Turn glass shade
(I)
clockwise
until it no longer turns.
NOTE:
Pull down gently on the glass shade (I) to
make sure it is secured completely.
6
Switch
Housing
S
S
Molex
Connections
F
U
7
Q
Q
I
F
8
Pull
Chain
Guide
Slot
Protrusion
(on inside)
