WIRING
10
1b.
FAN CONTROLLED BY PULL CHAIN,
LIGHT BY WALL SWITCH:
If you intend to
control the fan light with a separate wall switch,
connect BLACK wire from fan to BLACK wire from
ceiling. Connect BLUE wire from fan to the
BLACK wire from the independent wall switch for
the light. Connect WHITE wire from fan to WHITE
wire from ceiling. Connect all GROUND (GREEN)
wires together from fan (on motor assembly (C)
and mounting bracket (A)) to BARE/GREEN wire
from ceiling.
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
1b
FAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCH
GROUND/GREEN (BARE)
WHITE
BLACK
120 V Power
from ceiling
BLACK
WHITE
GROUND/GREEN (BARE)
ND/GREEN
BLACK
WHITE
WHITE
BLUE
FROM FAN
BLACK
BLUE
BLACK
WHITE
FROM FAN
WHITE
ND/GREEN
ND/GREEN
WHITE
BLACK
BLACK (WALL SWITCH)
BLACK (WALL SWITCH)
NOTE:
BLACK wire is hot power for fan. BLUE
wire is hot power for light kit. White wire is common
for fan and light kit. BARE/GREEN wire is ground.
1c.
FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES:
If you intend to control the fan
and light with separate wall switches, connect
BLACK wire from fan to BLACK wire from the
independent wall switch for the fan. Connect
BLUE wire from fan to the BLACK wire from the
other independent wall switch for the light.
Connect WHITE wire from fan to WHITE wire
from ceiling. Connect all GROUND (GREEN)
wires together from fan (on motor assembly (C)
and mounting bracket (A)) to BARE/GREEN wire
from ceiling.
WHITE
WHITE
GROUND/GREEN
BLACK
WHITE
WHITE
BLUE
FROM FAN
BLACK
BLUE
BLACK
WHITE
FROM FAN
WHITE
GROUND/GREEN
WHITE
WHITE
BLACK
BLACK (WALL SWITCH FOR LIGHT)
BLACK (WALL SWITCH)
BLACK (WALL SWITCH)
GROUND/GREEN (BARE)
120 V Power
from ceiling
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
1c
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire.
WARNING:
Make sure no bare wire or wire
strands are visible after making connections. Place
BARE/GREEN and WHITE connections on
opposite side of box from the BLACK and BLUE (if
applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
2.
2.
CC
2
Hardware Used
Wire Connector
x 4
CC
C
A
C
CC
CC
A
CC
CC
CC
CC
