11.
FINAL INSTALLATION
11
14
Lowes.com/harborbreeze
12.
12
Locate cap (K) in one of the hardware packs and
place cap (K) firmly in hole in middle of switch
housing cap. Align holes in switch housing cap
with holes in switch housing. (Make sure to align
gap on top edge of the switch housing cap with
the reverse switch on switch housing for the
correct fit.) Secure switch housing cap with three
switch housing cap screws (V) previously
removed (Step 5, page 11). Tighten all three
switch housing cap screws (V) securely.
13.
13
F
If you do NOT wish to use the light kit,
remove the hex nut (O) and lock washer (P)
from the threaded rod at the top of the light kit
fitter (D). Unscrew the switch housing cap to
remove it from the light kit fitter (D), and then
gently feed the BLACK and WHITE wires from
the light kit fitter (D) through the hole in the
middle of the switch housing cap.
WARNING
: RISK OF SHOCK. The molex
safety caps should not be removed unless a
light kit will be immediately installed and the
power should be turned off prior to molex safety
cap removal and light kit installation.
D
Switch
Housing
Cap
WHITE BLACK
O
P
O
V
V
K
Switch
Housing
Cap
Switch
Housing
Attach applicable pull chain extension (F) or
custom pull chain extension (not included) to the
fan pull chain.
