8
INITIAL INSTALLATION
4. Loosen all four preassembled mounting bracket
screws (B), and completely remove the two mounting
bracket screws (B) from the round holes of canopy
(C). Set aside for later use. Turn the canopy in a
counterclockwise direction. Detach mounting bracket
(A) from canopy (C).
5. Feed the supply wires from the outlet box through the
center hole in the mounting bracket (A). Then, secure
the mounting bracket (A) to the outlet box (not included)
using screws and washers provided with the outlet box.
CAUTION
: It is very important you use the proper
hardware when installing the mounting bracket (A) as it
will support the fan.
6. Raise the fan and place top of the canopy (C) on the
hook on the mounting bracket (A), temporarily leaving
hands free for the wiring process.
55
4
A
B
C
6
Outlet Box
C
A
A
