12
FINAL INSTALLATION
7. Remote control (L) comes equipped with a wall
bracket. If you wish to install the wall bracket, remove
the small plate to expose the screw holes. Insert wall
brackets screws through holes and into wall, then
cover with the previously removed small plate. The
remote from remote pack (L) can be stored in the
mounting bracket for easy access.
8.
Remove the battery cover from the back of the remote
found in remote pack (L). Insert the battery from
remote pack (L) into the remote; ensure polarity of
battery matches the polarity indicated in the battery
compartment -- positive (+) to positive (+) and
negative (-) to negative (-). Replace the battery cover
and press the high fan speed button on the remote to
ensure the remote turns on the fan.
Note:
If remote does not turn on fan, see
TROUBLESHOOTING (page 15).
9. Turn on the circuit breakers and the wall switch to the
fan supply line leads.
Assembly is complete.
8
7
Battery
Battery
Compartment
LED Indicator
Fan Power
9
Mounting
Bracket
Small Plate
Mounting
Screw
