3
2
TABLE OF CONTENTS
Safety Information............................................................................................................... 3
Package Contents............................................................................................................... 4
Hardware Contents............................................................................................................. 5
Preparation.......................................................................................................................... 5
Assembly Instructions......................................................................................................... 6
Operating Instructions.......................................................................................................... 11
Care and Maintenance........................................................................................................ 13
Troubleshooting................................................................................................................... 14
Warranty.............................................................................................................................. 15
Replacement Parts List ...................................................................................................... 15
3
Lowes.com/harborbreeze
Lowes.com/harborbreeze
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate, or install
the product.
•
When using an existing outlet box, be sure the box is securely attached to the building structure
and can support the full weight of the fan, so as to avoid potential serious injury or death.
• All wiring must be in accordance with the National Electrical Code “ANSI/NFPA 70-1999”
and local electrical codes. Electrical installation should be performed by a qualified licensed
electrician.
•
DO NOT
use bulbs with a wattage greater than the maximum value stated on the fixture and in
this manual. Using a higher wattage bulb than specified will increase fixture temperature and
cause risk of fire.
• Disconnect the electrical supply circuit to the fan before installing light kit.
• Electrical diagrams are for reference only.
• The net weight of this fan including the light kit is: 15.62 lbs.
WARNING
•
ELECTRIC SHOCK HAZARD
- To reduce the risk of electric shock, do not use this fan with any
solid-state speed control device.
• ELECTRIC SHOCK HAZARD
- To reduce the risk of electric shock, make sure electricity has
been turned off at the circuit breaker or fuse box before beginning installation.
•
PERSONAL INJURY HAZARD
- To reduce the risk of injury to persons, install fan so that the
blade is at least 7 ft. above the floor.
• ELECTRIC SHOCK HAZARD
- Do not install this fan with wall-mounted solid-state speed
control or wall-mounted light-dimmer control. It will permanently damage the fan’s remote control
receiver and cause the fan’s functions to fail.
• FIRE, ELECTRIC SHOCK OR PERSONAL INJURY HAZARD -
To reduce the risk of fire,
electric shock, or personal injury, mount to outlet box marked “ACCEPTABLE FOR FAN
SUPPORT OF 35.1 lbs OR LESS” and use mounting screws provided with the outlet box. Most
outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support
and may need to be replaced. Consult a qualified electrician if in doubt.
CAUTION
•
PERSONAL INJURY HAZARD
- Reduce the risk of personal injury, do not bend the blade
brackets when installing the brackets, balancing the blades, or cleaning the fan. DO NOT insert
foreign objects in between rotating fan blades.
