11
FINAL INSTALLATION
4.
Remove the three light pan screws (G) preassembled
to the side of the light pan (F).Connect the 9-pin
connector from the fan to the 9-pin connector from the
light kit (H). Secure the light kit (H) with the previously
removed light pan screws (G). Tighten all three screws.
5. The LED has five color settings that range from 2700K
(soft white) to 6500K (cool white). The factory setting
for the LED is 2700K. If desired, adjust the LED color
switch change the color temperature.
6. Lift the glass bowl (I) into the light kit (H) and turn in a
clockwise direction until it is secure.
CAUTION:
Avoid
cross-threading the glass during installation. Improper
installation could cause the glass bowl (I) to be difficult
to remove or fall, which could cause serious injury.
5
6
LED Color Switch
4
H
I
F
G
H
