13
Fig. 2A
Fig. 2B
Fig. 2C
OPERATING INSTRUCTIONS
1. To operate the fan using the remote, press and release
the following buttons:
1 - High fan speed
2 - Medium fan speed
3 - Low fan speed
4 - Fan Power - Turns the fan off.
Light Delay Off mode -
Press and hold the fan
power button (4) for five seconds, which will turn
off light after one minute. The LED indicator on the
remote will flash four times to confirm mode setting.
5 - Light Control: Press and hold light control to dim or
brighten the lights. Press light control to turn lights
off and on.
6 - D/CFL Switch: Set to “D” at the factory. The switch
should remain in the “D” position.
2. Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a difference
in your comfort.
In warmer weather,
push the reverse switch left to
display a sun icon, which will result in downward airflow
creating a wind chill effect (Fig. 2A).
In cooler weather,
push the reverse switch right to
display a snowflake icon, which will result in upward
airflow that can help move hot air off the ceiling area
(Fig. 2B).
Important:
Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate (Fig. 2C).
1
2
1
2
3
4
5
6
Front
Back
LED Indicator
Reverse
Switch
