3
HARDWARE CONTENTS
(shown actual size)
BB
AA
READ AND SAVE THESE INSTRUCTIONS.
SAFETY INFORMATION
• For your protection and safety, carefully read and understand the information provided
in this manual
completely before attempting to assemble, install or operate this product. Failure to do so could lead
to fire, electrical shock or other injuries that could be hazardous or even fatal.
• If using these light fixtures in a WET location, these light fixtures must be connected to a supply
circuit that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal
injury, electrical shock or death.
•
DO NOT connect this fixture to an electrical system that does not provide a means for equipment
grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an
electrical system not having a proper grounding means could cause metal parts of the fixture to carry
electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut
or loose during the mounting or normal operation of the fixture. Under this condition, anyone coming
in contact with the fixture would be subject to electrical shock, which could cause serious injury or
death.
•
DO NOT connect the bare or green insulation fixture ground wire to the black (HOT)
current-carrying wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture
ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical
currents. Under this condition, anyone coming in contact with the fixture will receive electrical
shock, which could cause serious injury or death.
•
DO NOT damage or cut the wire insulation (covering) during installation of fixture. DO NOT permit
wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation,
which could cause serious injury or death from electrical shock.
DANGER
Wire
Connector
Qty. 3
Machine
Screw
Qty. 2
• THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION
OF THE PRODUCT AND THE HAZARDS INVOLVED.
•
All electrical connections must be in agreement with local codes and ordinances, the National
Electric Code (NEC) and ANSI/NFPA 70-1999. Contact your municipal building department to learn
about your local codes, permits and/or inspections.
Risk of
fire - most dwellings built before 1985
have supply wire rated for 140 °F. Consult a qualified electrician before installation.
WARNING