14
FINAL INSTALLATION
10 .
To install the fan without the light kit
(H), remove
the hex nut and lock washer from the rod on the
inside of the switch housing cap (G) . Remove light kit
(H) from the switch housing cap (G) and discard, then
install the plug button (AA) into the center hole of the
switch housing cap (G) .
11 . Remove the three switch housing screws (S) from the
switch housing cap (G) and install the switch housing
cap (G) onto the switch housing (F) . Align the notch
in the switch housing cap (G) with the reverse switch
located on switch housing (F), then re-install the three
switch housing screws (S) .
12 . Turn on the power supply .
Assembly is complete.
10
11
G
G
AA
H
G
S
F
Hex Nut
Lock Washer
12
Notch
Reverse
Switch
