9
INITIAL INSTALLATION
7 . Remove the mounting bracket screws (R) and spring
washers (W) from underneath the lower mounting
bracket (D) . Also remove the motor screws (V) from the
bottom of the motor (E) . Retain for later use .
Note:
Make sure to keep loose hardware separate to
avoid confusion during installation .
8 . Place one tab of the lower mounting bracket (D) into a
slot in the upper mounting bracket (B) . Then slide the
second tab of the lower mounting bracket (D) into the
second slot on the upper mounting bracket (B) until all
four holes are in alignment .
9 . Re-install the previously removed mounting bracket
screws (R) and spring washers (W) to secure the
lower mounting bracket (D) and the upper mounting
bracket (B) .
5
69
8
7
R
W
V
E
D
R
B
D
B
B
D
Tab
Tab
Slot
D
