19
Lowes.com/harborbreeze
CARE AND MAINTENANCE
At least twice each year, tighten all screws on the fan. Clean the motor housing with only a soft
brush or lint-free cloth to avoid scratching the finish. Clean the blades with a lint-free cloth. You may
occasionally apply a light coat of furniture polish to wood blades for added protection.
Bulb Replacement: Use 40-watt max. candelabra-base bulbs or CFL equivalent.
Battery Replacement for Remote: Use A23 12-volt battery.
Important:
Shut off the main power supply before you begin any maintenance tasks. Do not use
water or a damp cloth to clean the ceiling fan.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The fan does not
move.
1. The power is off or the fuse is
blown.
2. There is a faulty wire connection.
3. The plugs are not connected
properly.
4. The reverse switch is not
completely engaged.
1. Turn the power on or check the
fuse.
2. Turn the power off. Loosen
the canopy and check all
connections.
3. Check that the connectors from
the light kit and fan are connected
properly.
4. Push the reverse switch
completely to the left or right.
There is excessive
wobbling.
1. The blades and/or blade are
loose.
2. The blades are unbalanced.
3. The fan mounting is not secure.
1. Check and tighten all screws that
hold the fan blades to the blade
arms and the blade arms to the
motor.
2. Switch one blade with a blade
from the opposite side. Or
balance the fan using the blade
balancing kit (R).
3. Turn off the power. Verify the
mounting bracket is secure to the
electrical outlet box. The bracket
must be flush without movement
against the outlet box.
The fan operates
correctly, but the
lights are not
working.
1. The bulbs are not installed
correctly.
2. The light kit wire plugs are not
connected properly.
3. There is a faulty wire connection.
1. Re-install the bulb(s).
2. Ensure the single-pin connectors
in the light kit are connected
properly.
3. Turn the power off and check all
connections at the ceiling outlet
box.
