10
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
3 . Slide the downrod (E) into the yoke of the motor
assembly (I), align the holes, and re-install the
downrod clip (EE) and downrod pin (DD) . Then re-
tighten the motor housing set screws (FF) and slide
the yoke cover (D) down until it rests on top of the
motor assembly (I) .
Haodwaoe Used
DD
Downrod Pin
x 1
EE
Downrod Clip
x 1
FF
Motor Housing
Set Screw
x 2
DD
3
FF
E
EE
I
D
4 . Install the hanger ball portion on the top of the
downrod (E) into the mounting bracket (A) opening .
Rotate the fan until the slot on the hanger ball
engages the tab on the mounting bracket (A) .
WARNING:
Be careful when aligning the tab
to the slot! If not fully engaged, there is a possibility
of the fan falling, which may result in serious injury or
death .
Proceed to the Wiring section of this manual .
A
A
E
4
