NOTE
: Black wire is hot power for fan. Blue wire
is hot power for light kit. White wire is common
for fan and light kit. Green or bare wire is ground.
Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire as
shown in Fig. 2.
WARNING
: Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of box
from the black and blue (if applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
CC
E3 Wire Connector x4
2.
Hardware Used
1
2
3
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
IMPORTANT
: Using a full range dimmer switch
(not included) to control fan speed will cause a
loud humming noise from fan. To reduce the risk
of fire or electrical shock, do NOT use a full range
dimmer switch to control fan speed. (Fig. 3)
3.
2
3
1C
FAN AND LIGHT CONTROLLED BY TWO WALL
SWITCHES
WHITE
BLACK (WALL SWITCH)
BLACK (WALL SWITCH FOR LIGHT)
GROUND/GREEN (BARE)
BLACK
BLUE
WHITE
FROM FAN
FAN
120 V Power
FROM
CEILING
GREEN
WHITE
GREEN
WIRING
1C.
FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES:
If you intend to control the
fan and light with separate wall switches,
connect
BLACK
wire from fan to
BLACK
wire
from the independent wall switch for the fan.
Connect
BLUE
wire from fan to the
BLACK
wire from the other independent wall switch for
the light. Connect
WHITE
wire from fan to
WHITE
wire from ceiling. Connect all
GROUND
(
GREEN
) wires together from fan (on motor
assembly (D) and mounting bracket (B)) to
BARE
/
GREEN
wire from ceiling. (Fig. 1C)
CC
CC
CC
CC
10
