9
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod pin (B) and downrod clip (C)
from the downrod (A). Then partially loosen the
set screws (K) in the yoke at the top of the motor
assembly (G).
2. Insert the downrod (A) -- or a longer downrod, if
required -- through the canopy (E) and yoke cover (L).
Thread the wires and braided cable from the fan up
through the downrod (A).
3. Slide the downrod (A) into the yoke of the motor
assembly (G), align the holes, then re-install the
downrod pin (B) and downrod clip (C). Secure with set
screws (K) and slide the yoke cover (L) down until it
rests on top of the motor assembly (G).
3
2
A
L
F
K
L
C
B
A
G
E
Braided
Cable
1
A
C
B
G
K
