9
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod pin (B) and downrod clip (C)
from the downrod (A). Then partially loosen the
set screws (L) in the yoke at the top of the motor
assembly (N).
2. Insert the downrod (A) through the canopy (E) and
yoke cover (G). Feed the wires from the motor
assembly (N) through the downrod (A).
3. Slide the downrod (A) into the yoke of the motor
assembly (N), align the holes, then re-install the
downrod pin (B) and downrod clip (C). Secure with
set screws (L).
C
B
A
A
G
N
E
2
3
Yoke
B
A
N
C
L
L
Yoke
1
