14
Lowes.com/harborbreeze
FINAL INSTALLATION
3 . Partially insert three blade screws (BB) along with
three blade washers (CC) through one blade (L) and
into one blade arm (K) . Tighten each blade screw
(BB) with a Phillips screwdriver (not included), starting
with the one in the middle . Repeat this step for the
remaining blades (L) and blade arms (K) .
Hardware Used
BB
Blade Screw
x 15
CC
Blade Washer
x 15
H
3
4 . Insert blade arm (K) through slots in the side of the
motor assembly (H) . Align the holes of one blade
arm (K) with two motor screw holes in underside
of the motor assembly (H) . Secure with two motor
screws (DD) . Repeat this step for the remaining
blade arms (K) .
Hardware Used
DD
Blade Screw
x 10
5 . Remove one of the four adapter plate screws (S)
from the adapter plate (I) on motor assembly (H) and
loosen the other three screws . Align the screw holes
of the light pan (N) with the loosened adapter plate
screws (S) . Replace previously removed adpater plate
screw (S), then tighten all screws .
BB
CC
K
L
K
H
S
N
Holes in the
motor assembly
DD
H
5
4
