Harbinger MLS800, Руководство пользователя

Страница: 9 / 14

• If linking multiple speakers, plug the Line OUT “TO NEXT” connection of
Speaker 1 to the Line In “CHANNEL 1” with the switch set to Line connection of
Speaker 2, and continue the daisy chain to the last speaker (this is common
where multiple monitor share the same feed from the mixing board)
• Turn the Power On in the order of the audio signal to prevent unwanted “pops”
(First On / Last Off)
MLS800 MIXER PANEL
1. Channel Volume Controls
Each channel has separate volume controls to allow discrete mixing of each
audio source.
2. Channel Input Switches
The Channel 1 or 2 input switches allow you to select between Microphone or
Guitar line levels. Channel 3 can either be a physical input source that comes