Harbinger MLS800, Руководство пользователя

Страница: 8 / 14

•Plug connections to Input 1. Make certain the Mic/Line switch matches the
source (Mic for microphones and instruments, Line for mixers, keyboards, or
instruments with active pickups)
• Plug connections to Input 2 (Note input 2 is a Line Input, and will not work
properly with a microphone )
Powering Up
•Turn on the power to any devices plugged into Input 1, Input 2, or Aux Input
•Power ON the speaker
•Slowly turn up the volume of the mobile audio device to the desired level
•Slowly turn Input 1 to the desired level
•Slowly turn Input 2 to the desired level
Clip Light and Proper Levels
• The SIG/CLIP LED will light up BLUE when the speaker is receiving
a signal. If it is distorting, the LED will turn RED and the MASTER
VOLUME should be turned down.
• Turn down the input signal that is distorting.
Linking Multiple Speakers