background image

LV8 

OWNER’S MANUAL

LV8 

OWNER’S MANUAL

14

15

FCC STATEMENTS

1.  Caution: Changes or modifications to this unit not expressly approved by 

the party responsible for compliance could void the user’s authority to 

operate the equipment.

2.  Note: This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generate, uses, 

and can radiate radio frequency energy and , in not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected 

• Consult the dealer or an experienced radio/TV technician for help

WARRANTY/CUSTOMER SUPPORT

IMPORTANT SAFETY INSTRUCTIONS

Please keep this instruction manual for future reference and for the duration of 
owning the LV5 mixer. Please carefully read and understand the instructions 
inside this owner’s manual before attempting to operate your new mixer.

This instruction manual includes essential safety information regarding the use 
and maintenance of the mixer. Take special care to heed all warning symbols 
and signs inside this manual and those printed on the bottom of the mixer.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE PRODUCT 
TO WATER/MOISTURE, NOR SHOULD YOU OPERATE THE PRODUCT 
NEAR ANY WATER SOURCE.
The exclamation point triangular symbol is intended to alert the user to the 
presence of important operating and maintenance(servicing) instructions in 
the user manual accompanying the product.
The lightning flash with an arrow triangular symbol is intended to alert 
the user to the presence of non-insulated “dangerous voltage” within the 
product’s enclosure, and may be of sufficient magnitude to constitute a risk of  
electric shock.

WARNING

Handle the power supply cord with care.

Do not damage or deform it as it may cause electric shock or malfunction 
when used. Hold the plug attachment when removing from wall outlet. Do not 
pull on the power cord.

IMPORTANT SAFETY PRECAUTIONS

1.  READ INSTRUCTIONS – All the safety and operating instructions should be 

read before this product is operated.

2.  RETAIN INSTRUCTIONS – The safety and operating instructions should be 

retained for future reference.

3.  HEED WARNINGS – All warnings on the product and in the operating 

instructions should be adhered to.

4.  FOLLOW INSTRUCTIONS – All operating and use instructions should  

be followed.

5.  

DO NOT turn on the product module before connecting all other 

 

external devices.

6.  WATER AND MOISTURE – Moisture can damage the product and can 

cause corrosion of electrical contacts. The system should not be used near 
water - for example, a bathtub, washbowl, kitchen sink, laundry tub, wet 
basement, or near a swimming pool, and the like.

7.  HEAT – The product should be situated away from heat sources such as 

radiators, heat registers, stoves, or other sources (including amplifiers) that 
produce heat.

8.  POWER SOURCES – This product should be operated only from the type 

of power source indicated on the rating label. If you are not sure of the 
type of power supply to your home, consult your product dealer or local 
power company.

9.  GROUNDING OR POLARIZATION – Do not defeat the safety purpose of 

the polarization or grounding-type plug. The wide blade or the third prong 
is provided for your safety. If the provided plug does not fit your outlet, 
consult an electrician for replacement of the obsolete outlet. Do not defeat 
the safety purpose of the 3rd pin grounding prong.

10.  POWER-CORD PROTECTION – Power supply cords should be routed so 

that they are not likely to be walked on or pinched by items placed upon 
or against them, paying particular attention to the cord in correspondence 
of plugs, convenience receptacles, and the point where they exit from  
the product.

11.  CLEANING – The product should be cleaned only as recommended by 

the manufacturer. Clean by wiping with a dry cloth. Avoid getting water 
inside the product.

12.  

NON-USE PERIODS – The power cord of the product should be 
unplugged from the outlet when left unused for a long period of time.

13.  OBJECT AND LIQUID ENTRY – Care should be taken so that objects do 

not fall and liquids are not spilled into the enclosure through openings.

14.  DAMAGE REQUIRING SERVICE – The product should be serviced by 

qualified service personnel when:

 

A. The power supply cord or the plug has been damaged; or

 

B. Objects have fallen, or liquid has been spilled into the product; or

 

C. The product has been exposed to rain; or

 

D.  The product does not appear to operate normally or exhibits a 

marked change in performance; or

 

E. The product has been dropped, or the enclosure damaged.

15.  Keep the product out of extended or intense direct sun light. 16. No 

containers filled with any type of liquid should be placed on or near  
the product.

17.  SERVICING – The user should not attempt any service to the product 

beyond that described in the operating instructions. All other servicing 
should be referred to qualified service personnel.

18.  VENTILATION – Slots and openings in the product are provided for 

ventilation and to ensure reliable operation of the product and to protect 
it from overheating. These openings must not be blocked or covered. 
The openings should never be blocked by placing the product on a bed, 
sofa, rug, or other similar surface. This product should not be placed in a 
built-in installation such as a bookcase or rack.

19.  ATTACHMENTS – do not use attachments not recommended by the 

product manufacturer, as they may cause hazards.

20.  ACCESSORIES – Do not place this product on an unstable cart, stand, 

tripod, bracket, or table. The product may fall, causing serious injury to a 
child or adult, and serious damage to the product. Use only with a cart, 
stand, tripod, bracket, or table recommended by the manufacturer, or 
sold with the product.

21.  LIGHTNING – For added protection during a lightning storm, or when it 

is left unattended and unused for long periods of time, unplug it from the 
wall outlet. This will prevent damage to the product due to lightning and 
power-line surges.

22.  REPLACEMENT PARTS – When replacement parts are required,  

be sure the service technician has used replacement parts specified by 
the manufacturer or have the same characteristics as the original part. 
Unauthorized substitutions may result in fire, electric shock, or  
other hazards.

23.  SAFETY CHECK – Upon completion of any service or repairs to this 

product, ask to perform safety checks to determine that the product is 
in the service technician to perform safety checks to determine that the 
product is in proper operating condition.

To prevent electric shock, or other outlet unless the do not use a polarized 
plug with an extension cord, receptacle blades can be fully inserted to 
prevent blade exposure.

WARNING: To reduce the risk of fire or shock do 

not expose this equipment to rain or moisture.
AVERTISEEMENT:  Pour  réduire  les  risques 

d’incendie et d’électrocution, ne pas exposer ce 

matérial à la pluie ou à l’humidité.

RISK OF

 ELECTRIC SHOCK 

DO NOT OPEN

RISQUE DE CHOC 

ELECTRIQUE NE 

PAS OUVRIR

RISK OF

 ELECTRIC SHOCK 

DO NOT OPEN

RISQUE DE CHOC 

ELECTRIQUE NE 

PAS OUVRIR

CAUTION: To reduce the risk of electric shock, do not 
remove chassis. No user-serviceable parts inside.
Refer servicing to qualified service personnel.

AVERTISEEMENT: Pour réduire les risques d’incendie et 
d’électrocution, ne pas exposer ce matérial à la pluie ou 
à l’humidité.

WARNING: To reduce the risk of fire or shock do 

not expose this equipment to rain or moisture.
AVERTISEEMENT:  Pour  réduire  les  risques 

d’incendie et d’électrocution, ne pas exposer ce 

matérial à la pluie ou à l’humidité.

RISK OF

 ELECTRIC SHOCK 

DO NOT OPEN

RISQUE DE CHOC 

ELECTRIQUE NE 

PAS OUVRIR

RISK OF

 ELECTRIC SHOCK 

DO NOT OPEN

RISQUE DE CHOC 

ELECTRIQUE NE 

PAS OUVRIR

CAUTION: To reduce the risk of electric shock, do not 
remove chassis. No user-serviceable parts inside.
Refer servicing to qualified service personnel.

AVERTISEEMENT: Pour réduire les risques d’incendie et 
d’électrocution, ne pas exposer ce matérial à la pluie ou 
à l’humidité.

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE 
OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) 
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT.

WARNING: To reduce the risk of fire or shock do 

not expose this equipment to rain or moisture.
AVERTISEEMENT:  Pour  réduire  les  risques 

d’incendie et d’électrocution, ne pas exposer ce 

matérial à la pluie ou à l’humidité.

RISK OF

 ELECTRIC SHOCK 

DO NOT OPEN

RISQUE DE CHOC 

ELECTRIQUE NE 

PAS OUVRIR

RISK OF

 ELECTRIC SHOCK 

DO NOT OPEN

RISQUE DE CHOC 

ELECTRIQUE NE 

PAS OUVRIR

CAUTION: To reduce the risk of electric shock, do not 
remove chassis. No user-serviceable parts inside.
Refer servicing to qualified service personnel.

AVERTISEEMENT: Pour réduire les risques d’incendie et 
d’électrocution, ne pas exposer ce matérial à la pluie ou 
à l’humidité.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING 
AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, 
SHALL BE PLACED ON THE APPARATUS.

2 YEAR HARBINGER LIMITED WARRANTY

Harbinger provides, to the original purchaser, a two (2) year limited warranty 
on materials and workmanship on all Harbinger cabinets, loudspeaker and 
amplifier components from the date of purchase. 

For warranty support, please visit our website at 

www.HarbingerProAudio.

com

, or contact our Support Team at 

888-286-1809

 for assistance.  Harbinger 

will repair or replace the unit at Harbinger’s discretion.

This warranty does not cover service or parts to repair damage caused by 
neglect, abuse, normal wear and tear and cosmetic appearance to the 
cabinetry not directly attributed to defects in materials or workmanship. Also 
excluded from coverage are damages caused directly or indirectly due to 
any service, repair(s), or modifications of the cabinet, which has not been 
authorized or approved by Harbinger. This two (2) year warranty does not 
cover service or parts to repair damage caused by accident, disaster, misuse, 
abuse, burnt voice-coils, over-powering, negligence, inadequate packing or 
inadequate shipping procedures. 

The sole and exclusive remedy of the foregoing limited warranty shall be limited 
to the repair or replacement of any defective or non-conforming component. All 
warranties including, but not limited to, the express warranty and the implied 
warranties of merchantability and fitness for a particular purpose are limited to 
the two (2) year warranty period. Some states do not allow limitation on how long 
an implied warranty lasts, so the above limitation may not apply to you. There 
are no express warranties beyond those stated here. In the event that applicable 
law does not allow the limitation of the duration of the implied warranties 
to the warranty period, then the duration of the implied warranties shall be 
limited to as long as is provided by applicable law. No warranties apply after  
that period. 

Retailer and manufacturer shall not be liable for damages based upon 
inconvenience, loss of use of product, loss of time, interrupted operation or 
commercial loss or any other incidental or consequential damages including 
but not limited to lost profits, downtime, goodwill, damage to or replacement 
of equipment and property, and any costs of recovering, reprogramming, 
or reproducing any program or data stored in equipment that is used with 
Harbinger products. This guarantee gives you specific legal rights; you may 
have other legal rights, which vary from state to state.

Harbinger

P.O. Box 5111, Thousand Oaks, CA 91359-5111

All trademarks and registered trademarks mentioned herein are recognized as 
the property of their respective holders.

2102-20394901

20394901 Harbinger LV8 Owners Manual_REV.indd   14-15

20394901 Harbinger LV8 Owners Manual_REV.indd   14-15

5/26/21   3:23 PM

5/26/21   3:23 PM

Содержание LV8










Отзывы: