HARBEN Eliminator VanPack, Руководство по эксплуатации и техническому обслуживанию

Страница: 33 / 61

33
6. Fault Finding
Most of the problems experienced during jetting operations are likely to be caused by the Inlet
water filter pump or the associated hoses.
These types of problems are covered in the pump fault finding chart, which is repeated
overleaf for convenience.
Also covered overleaf is a diagnosis of selector valve problems.
The table below indicates potential problems and suggests an appropriate course of action.
Lamps Condition Solution
Low oil pressure
shutdown.
Check oil level & top up if
necessary.
Check and replace switch if faulty.
Check the oil pressure if the
pressure is low
Refer to the handbook for further
advice.
Water/coolant
temperature
shutdown.
Check Coolant level & content top
up if necessary
Check and replace switch if faulty.
Check the water temp in the
radiator, if the temp is abnormally
hot, Refer to the engine handbook
for further advice.
Emergency stop button
in
Twist to release the button.
Note: The engine will not start in
this condition, do not continue to
crank the engine, as this will
damage the starter due to over
cranking!