HARBEN Eliminator VanPack, Руководство по эксплуатации и техническому обслуживанию

Страница: 20 / 61

20
4.5. Pre-start Checks & Procedures
4.5.1. Starting the Engine
Pre-start Checks
Ensure the open-ended high-pressure hose is in a safe position, preferably within sight of the
operator at the control panel.
Indirect Injection Diesel Engine Key Start Module Operating Procedure
1. Rocker Switch (Bottom Right of Panel) is the Master On/Off (0)
2. In position (1) (On) auxiliary circuits will be energized, screen will be illuminated.
3. Enter the 4-digit PIN using the up and down arrows to select numbers and the enter
button to select
4. Momentarily press the Green button on the Controller, this will automatically run
through pre-heat and prestart When cold. Engine will start automatically and idle at a
pre-determined engine rpm. **Water will now be circulating through the pump and be
diverted back the water tank