HARBEN 4018 US Van Pack Скачать руководство пользователя страница 48

Страница: 48 / 48

12.3. Limitations of Warranty:

The new product and spare parts warranty is limited to defects in material or workmanship of

the product. It does not cover loss of time, inconvenience, property damage or any

consequential damages. Repair or replacement of the product is your exclusive remedy.

Our liability under this clause shall be in lieu and to this exclusion of any warranty or conditions

implied or expressed by law as to the quality or fitness for purpose of any goods supplied

hereunder PROVIDED THAT nothing in this clause shall operate so as to exclude liability for

death or personal injury arising from the negligence of the company or its employees.

Our obligations as aforesaid shall constitute the full extent of our liability in respect of any loss

or damage sustained by the purchaser whether caused by any breach of this contract or by

our negligence or otherwise and we shall not be liable to make good or pay for loss of use of

the goods, loss of revenue, loss of profit or goodwill or any direct or consequential losses

howsoever caused and the purchaser undertakes to indemnify us against any such claims

against us by third parties.

All products manufactured, supplied, or installed for use at work are tested before they leave

our factory and are supplied with adequate instructions for their proper use. Further copies of

these instructions are available from us upon request.

Содержание 4018 US Van Pack

















































Результаты поиска

Содержание 4018 US Van Pack

Отзывы:

Похожие инструкции для 4018 US Van Pack

Бренды по названию

Популярные бренды

HARBEN 4018 US Van Pack, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание 4018 US Van Pack

Отзывы:

Похожие инструкции для 4018 US Van Pack

Бренды по названию

Популярные бренды