Step 16:
Step 17:
WARNING: ONLY USE THE HANDLE TO LIFT &
LOWER THE BED FRAME TO
AVOID TRAPPING FINGERS!
SAFETY WARNING
PLEASE DO NOT ALLOW CHILDREN
OR PETS INSIDE THE STORAGE AREA.
SAFETY WARNING
PLEASE BE CAREFUL WHEN LIFTING.
ONLY LIFT WITH MATTRESS ON TOP.
TO BE OPERATED BY ADULTS ONLY.
TO AVOID ACCIDENTS
TO ACCESS THE STORAGE AREA THE OTTOMAN FRAME
MUST BE FULLY OPENED
AND THEN
FULLY CLOSED
AFTERWARDS
R
1 pc
Spanner for flanged
M8 lock-nuts
H
1 pc
Allen Key for
M8 bolts
Carefully lay frame down. Make sure there is an
even gap each side of about 8 mm, as in the sketch.
8
mm
Q
4 pcs
Flanged M8 lock-nuts
Q
Q
12
Hold frame securely then tighten
all six bolt sets 100% using
spanner (R) & Allen key (H).
Fit the pistons (12) sliding the
stems (x) over the axles (y).
Tighten lock nuts (Q) with
spanner (R) but please DO NOT
over-tighten, a small gap needs
to be left so stems can move
freely - if too tight the frame will
be hard to lift so this is important.
SMALL GAP
y
x
R
1 pc
Spanner for lock-nuts
Please read warnings carefully
Note: Be very careful
what you store under
the bed - the top of an
item, like a
box or a
suitcase, must not
touch the slats or they
may be damaged.
Maximum storage
height is 240mm.
