Note: For illustration purposes only, TV connections may vary.
Tip:
Before fitting the TV, push cables through each
duct from the top choosing the best side to use
depending on where the connection ports are
on back of your TV.
Never cross cables from one side of the
footboard to the other unless cable is threaded
under the TV supports, in front of the TV Lift.
10mm
Max TV Height
575mm
Height of TV is normally pre-set - follow this guide if it needs to be changed.
V
Step 9:
Step 10:
Media Cable are
not supplied
TV Power Lead
supplied with your TV
W
i.
Loosen the two bolts.
Measure the height of the TV.
Adjust the lid lifter column adding 10mm to
height of the TV.
Re-tighten the two bolts.
ii.
The upper part of each TV support slides
to hold front of TV in place, see step 12.
