Training Workbook: HAPPY HCD-1501 Operation and Maintenance
Education Department
Chapter 2: Machine Setup & Orientation
24
Machine Setup
Control Panel 2
Design Transfer
Control Panel 2
Important Main Menu Screens: Frame Screen
FRAME
The Frame function performs the same function as the FAST button in the Main/Drive
screen, (but with a few more options). It allows you to choose a hoop, then see/adjust
position and fit.
HOW TO USE THE “FRAME” FUNCTION
Follow the steps on this page to use the Frame function. (continued from previous page)
Choose a hoop and
press SET:
the right
side numbers indicate
hoop size in mm.
(The left side number
is an internal
reference # and not
useful)
4. A screen appears showing
the available hoops for that
category.
In the example on
the right, the Round hoop
category was chosen, so a
list of available round Happy
hoops are shown. Sizes are
indicated in mm in the right
column (ignore the left
column of 2-digit numbers).
For example, if you wish to
choose a 12cm hoop, choose
“120”.
5. Press SET to select the
hoop.
Design outline
appears in blue. Red line is
the safety margin for the
hoop. Black outline is outline
of hoop itself.
