Training Workbook: HAPPY HCD-1501 Operation and Maintenance
Education Department
Chapter 2: Machine Setup & Orientation
21
Machine Setup
Control Panel 2
Design Transfer
Control Panel 2
Important Main Menu Screens: Read Screen
READ
NEXT: THE POSITION FUNCTION
Left side: “read settings”
for the design: allows you
to adjust the way the
machine reads in a design.
Some useful features are
illustrated here.
Right side: design list from
the card:
shows 8 designs
at a time – to view the rest,
arrow down below the list
bottom or up to go higher.
To access left
side options
To set left side
options back to
factory defaults
combine jump
– net effect
reduces the number of trims
in a design
stitch sweeper
– always
turn on. removes
problematic short stitches.
sweep length
–lets you
set the max size of the
stitches it deletes in tenths
of a mm. 4 is the
recommended value.
Choose CF card or USB
Jump drive
from the
selections shown on the
right when first selecting
“READ”.
The Read screen is used to read designs from a compact flash card or USB
jump drive.
