Happ Happ10, Инструкция по установке и эксплуатации

Страница: 22 / 31

Scissor lift Happ10
Version 4.0 ©HAPP Australia Pty Ltd Page 22
l Set Power Switch to on position
l Press UP button on pump assembly motor to raise the vehicle a small
amount of ground level
l Check the vehicle is stable on the lift
l Continue to lift to desired height if stable otherwise lower and reposition.
Repeat until stable lift is achieved.
l At desired height release UP button.
l Always ensure that the lift rests on the safety before any attempt is
made to work on or near the vehicle. Depress lower lever on pump
assembly to lower onto safety latch. Inspect safety latch to verify latch is
engaged fully.
6.3 To lower the lift
l Be sure the safety area is free of people and objects;;
l Raise the lift a little bit by pushing UP button to clear off the safety;;
l Press unloading handle on the trolley to disengage safety
l Press lower lever on pump assembly to lower the lift.
l Lower the lift completely or to desired height. If at a new height engage
safety before working on vehicle.