Hapi Ozy, Руководство пользователя

Страница: 19 / 26

EN
4.8 Adjusting the seat angle
The angle of the seat can be adjusted by pressing the red key. Adjust the angle of the car seat
The car seat can be rotated 360 degrees by pressing the red rotary knob down. It is convenient
release the ISOFIX connectors, you can release the ISOFIX connectors by pressing the red
release button.
Step 3 - Use a 3-point seat belt to connect the seat.
to the right position for your child to enhance the comfort required. (Figure 1, Figure 2).
4.9 Adjusting the car seat rotation
to adjust the correct direction of use.
1) Pull the straps out until they are fully tightened. Strain the straps as much as possible without
Step 3 - To open the belt, press the red button down and the buckles will jump automatically.
4.5 Adjust the length of the strap
child is seated on the car seat, check that the seat belt adjustment device can be used normally,
2) The shoulder strap can be weakened by pressing the seat belt adjustment device hidden
under the seat of the car seat. Operate the seat belt adjustment device while holding the two
placed near the legs and not the abdomen. Free belts are dangerous. Therefore, every time the
then pull the straps, tighten the straps and do not twist (figure 1).
front straps with the other hand to loosen the straps (fig. 2).
4.6 Adjust ISOFIX chuck
Press the red ISOFIX release button and push the fit chuck out to the outermost so that the
ISOFIX chuck can be installed. If you want to retract the ISOFIX chuck you can pull the ISOFIX
chuck back by pressing the red ISOFIX release button inward.
4.7 Car seat installation
Step 1 - First pull the ISOFIX connector to the outer end, then insert it into the car. When you
hear the click sound, the Isofix connectors are connected. At this time, the green color will
appear on the lock display window.
Step 2 - push the car seat behind the car until the two are perfectly aligned. If you want to
causing the child's discomfort. The safety belt should be as low as possible and should be
equal to the child's shoulder or slightly larger than the shoulder position of the child (fig. 3). The
When using the car seat, adjust the height of the head restraint to adjust the height of the
4.3 Check the height of the straps
Check that the height of the shoulder harness is suitable for the child: the harness must be
height of the shoulder strap can be adjusted up and down with the height of the head restraint.
shoulder strap.
4.4 Buckle using
Step 1- pull the button left and right together
Step 2- insert the closed insert into the slot at the same time. If you hear the click sound it
means that the buckle is stuck. Pull the insert up and check that the buckle is locked properly.
Step 3- to unfasten the seat belt, press the red button down and the insert will pop up
automatically.
4.5 Adjust the length of the strap
Step 2 - Insert the buckles into the slot at the same time. If you hear the "click" sound, it means
Step 1 - Drag the left and right buttons together
it is locked.