7
(SIGNAL ON INTERVAL mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied OUT turns ON,
and timing starts (START signal holds ON status)
2. When the time value reaches the set value OUT turns OFF,
time value is held.
3. When START signal is cancelled, OUT output and time
value are initialized.
4. When RESET signal is applied, OUT output and time
value are initialized.
5. When RESET signal is cancelled, OUT turns ON and timing restarts if the START signal is applied
t : set time
set value
set value
(SIGNAL OFF DELAY mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied, OUT turns ON.
2. When START signal is cancelled, OUT output is held, timing starts.
3. When time value reaches set value,OUT turns OFF,time value is held.
4. If START signal is applied during timing, OUT output is held,
time value is initialized.
5. When RESET signal is applied, OUT output, time value are initialized.
6. When RESET signal is cancelled, if START signal is applied,
OUT turns ON.
t : set time
set value
set value
(SIGNAL ON FLICKER – OFF START mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied, Toff time timing starts.
(START signal holds ON status)
2.When the time value reaches the OFF set value OUT
turns ON, and Ton time timing starts after time value initialization.
3. When the time value reaches the ON set value OUT turns OFF.
4. Depending on the Ton set time and Toff set time, the
output repeats the above ON and OFF operations.
5. When START signal is cancelled, OUT output, time value are initialized.
6. When RESET signal is applied, OUT output and time value are initialized.
7. When RESET is unlocked, it is displayed from Toff time if the START signal is applied.
* Ton time and Toff time can be set individually.
* In operation mode, the Toff time is displayed on the PV display, and the Ton time is displayed on the SV display.
Ton
Toff
Ton
Ton
Toff
Toff
Toff
Toff
Toff
Toff
Ton
Ton
Toff: OFF set time Ton: ON set time
ON set value
ON set value
OFF set value
OFF set value
(SIGNAL ON/OFF DELAY – ON START mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied OUT turns ON,
Ton time timing starts (OUT is ON during Ton time).
2. When the time value reaches the ON set value OUT turns OFF,
the time value is held.
3. When START signal is cancelled, OUT turns ON,
Toff time timing starts. (OUT is ON during Toff time)
4.When the time value reaches the OFF set value OUT turns OFF,
the time value is held.
5. If START signal is cancelled during ON time timing, OUT holds ON status,
time value is initialized, Toff time is displayed.
6. If START signal is applied during OFF time timing,OUT holds ON status,time value is initialized, Ton time is shown.
7. When RESET signal is applied, OUT output and time value are initialized.
8. When RESET is unlocked, OUT turns ON if the START signal is applied it is displayed from Ton time.
* Ton time and Toff time can be set individually.
* In operation mode, Ton time is displayed on PV display, Toff time is displayed on SV display.
Ton
Ton
Toff
Toff
Ton
Ton
Toff Ton
Toff
Toff
Toff: OFF set time Ton: ON set time
ON set value
ON set value
OFF set value
OFF set value
(SIGNAL ON/OFF DELAY – OFF START mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied Ton time timing starts.
2. When the time value reaches the ON set value OUT turns ON,
time value is held.
3. When START signal is cancelled, OUT holds ON output status,
Toff time timing starts.
4.When the time value reaches the OFF set value OUT turns OFF,
time value is held.
5. If START signal is cancelled during ON time timing, OUT turns ON,
time value is initialized, Toff time is displayed.
6. If START signal is applied suring OFF time timing, OUT turns OFF,
time value is initialized, Ton time is displayed.
7. When RESET signal is applied, OUT output and time value are initialized.
8. When RESET is unlocked, it is displayed from Ton time if the START signal is applied,
* Ton time and Toff time can be set individually.
* In operation mode, the Ton time is displayed in the PV display, and the Toff time is displayed in the SV display.
Ton
Ton
Ton
Toff
Ton Toff Ton Toff
Toff
Toff
Toff: OFF set time Ton: ON set time
ON set value
ON set value
OFF set value
OFF set value
(SIGNAL TRIGGER ON DELAY mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied, timing starts.
2. When the time value reaches the set value OUT turns ON,
output and time value are held.
3. Even if the START signal is applied repeatedly, only the first
START signal is used.
4. When RESET signal is applied, OUT output, time value are initialized.
* In function setting mode, when output time ‘OUTT’ is set as ‘HOLD’,
OUT output holds the output status, when output time ‘OUTT’ is set as
‘00.01~99.99’ sec, OUT is ON only during set time. (ONE-SHOT output)
Tout
Tout
Tout
set value
set value
self-hold output
ONE-SHOT output
(SIGNAL TRIGGER INTERVAL mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied OUT turns ON, and timing starts.
2. When time value reaches set value,OUT turns OFF, holds time value.
3. Even if START signal is applied repeatedly,only uses the first
START signal.
4. After reaching the set time, when START signal is applied OUT turns
ON and timing starts after time value initialization.
5. When RESET signal is applied, OUT output, time value are initialized.
t : set time
set value
set value
(SIGNAL TRIGGER ON DELAY-RESET mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied, timing starts.
2. When the time value reaches the set value, OUT turns ON,
output and time value are held.
3. If START signal is re-applied during timing, timing starts after time
value initialization
4. When RESET signal is applied, OUT output and time value are initialized.
* In function setting mode, when output time ‘OUTT’ is set as ‘HOLD’,
OUT output holds the output status, when output time ‘OUTT’
is set as 00.01~99.99‘ sec, OUT is ON only during set time (ONE-SHOT output).
Tout
Tout
Tout
set value
set value
default operation
power
(SIGNAL TRIGGER FLICKER – ON START mode)
POWER
②-⑦
START
③-②
RESET
④-②
OUT
⑧-⑥
1. When START signal is applied OUT turns ON, Ton time timing starts.
2. When the time value reaches the ON set value OUT turns OFF,
and Toff time timing starts after time value initialization,
3.When the time value reaches the OFF set value OUT turns ON.
4. Depending on the Ton set time and Toff set time, the output
repeats the ON and OFF operations as above.
5. Even if START signal is applied repeatedly,only uses the first
START signal.
6. When RESET signal is applied, OUT output, time value are initialized.
* Ton time and Toff time can be set individually.
* In operation mode, Ton time is displayed on PV display, andToff time is displayed on SV display.
Toff
Ton
Toff
Ton
Ton
Ton
Toff
Ton
Toff
Ton
Toff
Ton
Toff: OFF set time Ton: ON set time
ON set value
ON set value
OFF set value
OFF set value
self-hold output
default operation
power
Ton
Ton
Toff
Toff
default operation
power
default operation
power
default operation
power
Ton
Toff
default operation
power
Ton
Toff
default operation
power
default operation
power
Toff
Toff
Ton
Ton
default operation
power
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
Tout : output operating time
t : set time
ONE-SHOT output
Tout : output operating time
t : set time
