Hanwha Vision QNE-C9013RL, Руководство пользователя

Страница: 11 / 24

English _
11
!
INST
ALLA
TION & CONNECTION
INSTALLATION
J
`
The camera jack connected to the external cable is not waterproof. You are recommended to install this product below the
edge of eaves to prevent the cable from being externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~
It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera
including the installation bracket.
~ Stuck-in or peeled-off cables can cause damage to the product or a fire.
~
For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
~ If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
Disassembling
1. Remove the camera body by turning
the mount plate fastening screws
counterclockwise.
` Note that it is not necessary to loosen the screws
completely.
installation & connection
Installation
1. Place the mount plate on the desired location considering the direction
to be monitored, mark the locations for the screw holes and cable
holes, and then drill the holes.
2. Fix the mount plate using appropriate screws.
3. Connect the network cable to the camera’s PoE port.
4. Join the camera body with the mount plate.
2x
TR10
TR10
2x