Hanwha Vision QNE-C9013RL, Руководство пользователя

Страница: 14 / 24

installation & connection
14_
installation & connection
Removing a Micro SD Memory Card
Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory
card from the slot.
J `
Before removing the Micro SD card, in <
Setup ( )
>-<
Event
>-<
Storage
>, set the device to <
Off
> and press the [
Apply
]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD memory card that contains data from the product, the data may be lost or
damaged.
POWERING AND NETWORKING
Connect the PoE device and camera’s PoE connectors.
PoE Router
J ` Connect to a PoE (Power over Ethernet) enabled router’s PoE connector.
` Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols.
` If you want to connect an external device, you must turn off the external device before proceeding.
Network Cable Specification
Item Contents Remark
Connector RJ45
Ethernet 10/100BASE-T 10/100 Mbps
Cable Category 5e
Max Distance 100 m DC Resistance ≤ 0.125 Ω/m
PoE Support IEEE 802.3af
M
`
If you use a cable other than Category 5e standards, 100m of transmission distance is not guaranteed.