Hanwha Vision PNM-C32083RVQ, Руководство пользователя

Страница: 10 / 33

overview
10_
overview
Components (Rear Side)
Item Description
a
PoE+ port
This port connects power and network via PoE+ injector.
b
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
c
Audio/alarm cable port
Plug in the audio and alarm cable to this port to connect with external alarm device/
microphone/speaker.
c
b
a