Hanwha Vision PNM-C32083RVQ, Руководство пользователя

Страница: 18 / 33

installation & connection
18_
installation & connection
13. Adjust the lens to the desired direction by referring to “ Adjusting the monitoring direction for the
camera ”.
`
If you tilt the lens, you may need to adjust the lens as this may block the screen.
` Connect a monitoring device to the USB port and then monitor and adjust it. (page 20)
14. Assemble the dome cover.
` When assembling the dome cover, align the pipe cover part to assemble it.
`
To ensure there are no issues with waterproofing, tighten the fastening bolts tightly.
TR20
6x
Outdoor installation
When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be
purchased in stores) so that water does not leak from the gap of the cable connected to the outside.
1. Connect network and alarm/audio cables, etc.
2. Wrap the black cable jacket (Area A) and the cable connection area with waterproof (butyl rubber) tape so
that more than half of the butyl rubber tape is overlapped.
J
`
If the cable jacket is not waterproofed properly, then it can directly cause leakage. Make sure to protect the cable with a
dense layer of taping.
`
Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length.