installation & connection
16_
installation & connection
Install lens module (SLA-T2480VA/SLA-T4680VA)
1.
Make a hole for the lens module at the spot where you want to install it.
2.
Remove the protective film to use the double-sided tape of the lens module bracket
and attach it to match the hole.
J
`
Remove foreign substances on the target object before attachment.
3.
Insert the lens module into the lens module bracket.
4.
Tighten the screws in the screw hole on the bracket.
`
This only applies to the SLA-T2480VA.
5.
Organize the cable separately (within 1m from the lens module).
Installing the lens module in the main unit
Connect the lens module cable to the
[CAM]
port on the side of the main unit.
J
`
Connect the lens module and turn it on.
`
Turn off the main unit power when connect or remove lens module
`
Install the lens at least 3 meters away from the main unit. It is recommended to not fix the cable within 3 meters from the
main unit.
3m
AUDIO
OUT
AUDIO
IN
USB
CAM
<SLA-T2480VA/SLA-T4680VA>
<SLA-T2480A/SLA-T4680A>
<SLA-T1080FA>
Содержание Wisenet XNB-6002
Страница 31: ......