Hanwha Techwin WISENET TNU-6322ER, Руководство пользователя

Страница: 9 / 25

English _
9
!
INST
ALLA
TION & CONNECTION
installation & connection
INSTALLATION (TNU-6322ER, TNU-6322E)
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~
Install the system based on the following directions. If you want to install using a different method, you
should confirm the safety recommendations by making a request to the manufacturer in advance.
~ The weight of TNU-6322ER and TNU-6322E is approximately 36kg (without Pedestal) and 25kg (without
pedestal), respectively. When installing the product, at least two people wearing a pair of non-slip gloves
are needed for safety.
~ The product must be installed in a place that can support four times the weight of the camera and
installation bracket combined.
~
Please be careful when installing the product as electrical abnormality or fire can be caused if the cable is
caught and its coating is damaged.
~ When installing the camera, make sure that no one other than the authorized person approaches the
installation site for safety.
~
If any accessories or non-standard products not shipped with this product are used, there is a potential
safety risk that might cause accidents.
Special conditions of use
1. The dimensions of flameproof joints are different from the values specified in the tables of the IEC/EN
60079-1 standard. Contact the manufacturer for details of the flameproof joints.
2. For equipment to which the cable is permanently connected, the user connects the free end of the cable
in either a non-explosive atmosphere or an enclosure protected in a recognized protection mode suitable
for the area.
3. The screws used for the assembly of the various parts of explosion-proof enclosures must be of quality
higher or equal to A2-70.
4.
Carrying camera using transporting rope.
Our product provides a transporting rope.
5. Remove the cable only after completing installation.
6. For safety, at least two persons are need to carry the camera using the transporting rope.
<TNU-6322ER> <TNU-6322E>
Maintenance and Repair
Contact a HANWHA TECHWIN or WONWOO Engineering representative to send the device back for
function verification.
J ` There are no user-serviceable portions of the devices.
` When operating the devices in conjunction with a hazardous area, do not modify the system.
If there is a defect, the product may need to be replaced.
Repairs can only be performed by a WONWOO's specialist who is trained and authorized to repair the defect.
`
When servicing, installing, and commissioning, the area must be free of all combustible material and/or hazardous explosive
gas.
Only the terminal compartment of the control unit is accessible to users.
Under no circumstances shall the control unit or vent be dismantled or removed from the supplied enclosure,
unless instructed in this manual.
Contact HANWHA TECHWIN or WONWOO Engineering customer service for an RMA (return merchandise
authorization).