English
_7
Configuring the recording
This section outlines how to configure and view the recording settings for each channel.
a
Shows the standard and event recording method for each channel.
• FULL : Records all the frames received from the camera.
• KEY : Records only the key frames received from the camera. In general, one or two frames per second
are recorded, but you can adjust this in the camera settings.
• OFF : Turns off recording.
b
Shows the transmission size of the recording data for each channel.
c
Shows the data size limit for each channel.
M
`
The orange colored channel indicates the case where the
b
input data load is greater than the
c
permitted data load.
If you set the
c
permitted data load to greater than the
b
input data loads, it will be changed to orange.
`
If the sum of input data for each channel is greater than the max level for the camera, then
d
the recording exceeding icon
and the alarm message will be displayed. In this case, for the channel exceeding the input limit will record the main
frame(one or two per second) only.
a
b
c
FULL
NO
RAID
RAID
SCSI
recording restriction
record data size exceeded limitation
Only key frames are recorded
Please check the record settings
do not show this message again
OK
record status
d
