Hanwha Techwin WISENET SRN-4000, Быстрое руководство

Страница: 4 / 10

4_ English
GettinG started
If you start the product, the < install Wizard > screen will appear.
Follow the < install Wizard > to set the product in an easy way and automatically register your camera.
M
`
Before you start the product, you must connect the product to a hard disk drive, NVR, and network camera. (see pages
13-23 of the User Manual)
`
At the time of initial registration, leave the camera in the initial setting.
install Wizard
As shown below, proceed through each step of the < install Wizard >.
1. In the < Language > screen, select the language and press the < next > button.
2. In the < id/PW > screen, set the password and press < next >.
• setting Camera Password • Password setting guide
You can change the password of a camera that is in a
factory reset state.
- New Password : Input a new password according
to the password setting rules.
- Confirm Password : Input the new password again.
When you click < >, a basic guide for setting a
password is displayed.
Check the password setting rules.
3. In the < network > screen, set the network access method and the access environment. To use a simple
intranet, click < next >.
• Network 1 (Camera) / Network 2 (Camera) : Connects to the camera and receives the video feed from the
camera
• Network 3 (Viewer) : This is a port for transmitting an image to the webviewer.
• Network 4 (iSCSI) : This is a port for connecting an external iSCSI.