Hanwell IKVM-101Plus, Руководство пользователя

Страница: 42 / 109

Single Port KVM over IP
The IP-KVM firmware features a Telnet server that enables a user to
connect via a standard Telnet client. In case the Telnet program is using a
VT 100, VT 102 or VT 220 terminal or an according emulation, it is even
possible to perform a console redirection as long as the IP-KVM host
machine is using a text mode screen resolution.
Connecting to the IP-KVM is done as usual and as required by the Telnet
client, for instance in a UNIX shell:
telnet 192.168.0.70
Replace the IP address by the one that is actually assigned to the IP-KVM.
This will prompt for username and password in order to log into the device.
The credentials that need to be entered for authentication are identical to
those of the web interface. That means, the user management of the
Telnet interface is entirely controlled with the according functions of the
web interface.
Once you have successfully logged into the IP-KVM a command line will be
presented and you can enter according management commands.
In general, the Telnet interface supports two operation modes: the
command line mode and the terminal mode. The command line mode is
used to control or display some parameters. In terminal mode the
pass-through access to serial port 1 is activated (if the serial settings were
configured accordingly). All inputs are redirected to the device on serial
port 1 and its answers are displayed on the Telnet interface.
The following list shows the according command mode command syntax
and their usage.
help
Displays the list of possible commands
cls
Clears the screen
quit
Exits the current session and disconnects from the client
version
Displays the release information
42 / 109