Single Port KVM over IP
Figure 3-6 Remote Console Options Menu:Cursor
• Video Settings
Opens a panel for changing the IP-KVM video settings. IP-KVM
features two different dialogs, which for adjusting the video settings.
Video Settings through the HTML-Frontend
To enable local video port, select this option. This option decides if
the local video output of IP-KVM is active and passing through the
incoming signal from the host system.
The option Noise Filter defines how IP-KVM reacts to small changes
in the video input signal. Turning on the noise filter can help
reduce video flickering that is often caused by distortions, as well
as lowering unnecessary bandwidth consumption. A large filter
setting needs less network traffic and leads to a faster video
display, but small changes in some display regions may not be
recognized immediately. A small filter displays all changes
instantly but may lead to a constant amount of network traffic
even if display content is not really changing (depending on the
quality of the video input signal). All in all the default setting
should be suitable for most situations.
32 / 109
Содержание IKVM-101Plus
