Appendix C: TDES Key Installation
Operator Manual
1700w™
(Rev 1)
© Hantle 2010
C.4
Once you have selected Part A or B, you’ll
be prompted to enter a Key Index.
This index points to the location where the
key will be stored. There are 16 possible
memory locations (0-15) available. Unique
master keys must be stored at location #12,
and MAC keys at location #15.
The interface will default the values for Unique and MAC keys regardless of what you
enter. It is very important to remember that both parts of a key must be entered on the
same index. If you enter Part A on index #2 and Part B on index #3 the key will not be
complete. Use the Check Key function (shown above) to determine where your keys
parts have been entered.
If entering a Unique key, next you’ll be
prompted to enter the key serial number.
This 10 digit number is found on the
paperwork containing your master key(s).
If the number the processor has provided is
less than 10 digits, you’ll need to add zeros
to the
beginning
of the number to equal 10
digits.
In the example shown at left, the serial
number is 235913. This 6 digit number
would be changed to 0000235913 to
create 10 digits.
The next step is to enter the master key
itself. If you are using TDES, you’ll need to
enter the left portion first.
After entering the key, you’ll be prompted to
enter it a second time for verification.