EN
Channel Search
Once the television is turned on, you will be prompted
to perform the first automatic digital channel search.
Then, it is possible to:
Upgrade the channel list: channels not found
before are added
Reinstall channel lists: all the information
about memorized channels/channel lists is
cancelled and a new automatic digital channel
search is run.
DTT MODULE OSD
Receiver Status
Some basic information about the hardware and software version of the decoder is displayed. Various
submenus are available.
1.
Diagnostics Information
: information necessary to verify that the system functions properly.
HW information
SW information
Smart Card status
Common interface
Signal strength
Modem status
2.
CA Information
: information about the conditional user access system.
3.
Common Interface
: information about the Common Interface used.
4.
System Information
5.
Loader Information
6.
Upgrade
: manually runs a search and upgrade for new software available via OTA
Factory Reset
Select “Yes” and confirm to reset the parameters to the factory settings.
HELP
This is brief electronic guide to some of the decoder’s functionalities.
__________________________________________________________________________________________
LCD IDTV MHP – Rev. 1.1
7
.9