E. Disintegration Testing
Phase One Disintegration Tester User Guide—40-108-001 Rev. A—14 November 2016
E-8
Pausing a Test
While a disintegration test is running, whether in timed or free
run mode, the screen will display the option to pause the test.
When the control knob is pressed while PAUSE is highlighted,
the following actions will occur:
The motion of the arms will stop immediately.
The timer will stop counting up or down.
The orange logo lens will begin blinking
The screen will display three choices: RESUME, LIFT, or
ABORT. Note that the RESUME option will be highlighted
by default (as shown below).
Selecting RESUME by pressing the control knob causes
the test to continue from where it left off. The timer and
cycle count will continue from their previous values. The
display will revert to highlighting the PAUSE function.
Selecting LIFT will move the baskets to their highest
position, completely out of the beakers, with the option to
resume the test at a later time.
