Spider
EN
Feeding computer
-
Voercomputer
-
Fütterungscomputer
-
Logiciel d
’
alimentation
Index
8
-
46
Hanskamp AgroTech B.V. (The Netherlands)
www.hanskamp.nl/en
2.3.1 General safety
•
Read and understand the manual and all safety signs before you connect power supplies to operate or adjust
Spider.
•
Only trained persons are permitted to operate the Spider.
•
Install all protective covers and guards before you operate the Spider.
•
Wear proper protective clothing and equipment.
•
Disconnect and isolate the electrical power supply before you clean or do maintenance on the Spider.
•
Make sure you know how to contact your local medical emergency center.
•
Contact your nearest milking equipment dealer if you have any questions.
•
Review safety related items with all operators frequently (annually).
2.3.2 Electrical safety
•
Only authorized electricians are permitted to install the electrical power supply for the Spider.
•
Make sure the electrical grounding of the electrical system and all parts of the Spider meet the local rules and
regulations.
•
Replace any damaged electrical lines, conduits, switches and components immediately.
•
Isolate the electrical power supply before you open the Spider enclosure to work on the electrical system.
2.3.3 Installation safety
•
Read and understand the instructions in this manual.
•
Make sure the Spider is installed correctly.
2.3.4 Operating safety
•
Read and understand the applicable manual and all safety signs before you connect power supplies to operate
or adjust the Spider.
•
Only trained persons are permitted to operate the Spider.
•
Switch off the electrical power supply by pulling the plug out of the power point and secure the plug before
you clean or do maintenance on the Spider.
•
Install the covers and guards before you operate the Spider.
•
Keep away hands, feet, hair and clothing from all electrical parts.
•
Keep away unauthorized persons, especially small children, from the Spider at all times.
•
Before the electrical supply is attached to the Spider, make sure all parts are installed firmly and that all the
parts are in good condition.
•
Contact your nearest milking equipment dealer if you have any questions.
