background image

 

4 - 20

 

Hanskamp AgroTech B.V. (the Netherlands) 

www.hanskamp.nl/en

 

 

Pipefeeder 

EN 

24VAC & 12

-

24VDC 

2. Safety 
 

2.1 Introduction 

The safety alert symbol identifies important safety messages on your PipeFeeder and in 
the manual. When you see this symbol, be alert to the possibility of personal injury or 
death. Follow the instruction of the safety message. 
 
 

 
 
 
 
 

Safety Alert Symbol 

2.2 Signal Words 
 

Note the use of the signal words DANGER, WARNING and CAUTION with the safety mes-
sages. The signal word for each message uses the following guidelines: 

 

Warning! 

Indicates a potentially hazardous situation that, if not avoided, could re-

sult in death or serious injury, and includes hazards that are exposed when guards 

are removed. 

Danger! 

Indicates a imminently hazardous situation that, if not avoided, will re-sult 

in death or serious injury. 
 

2.3 Safety Instructions 
 

YOU are responsible for the SAFE operation and maintenance of your PipeFeeder. YOU 
must make sure that you and anyone else who is going to operate, maintain or work in 
the vicinity of the PipeFeeder knows all the related SAFETY information in this manual. 
 
YOU are the key to safety. Good safety practices protect you and the people around you. 
Make these practices a working part of your safety program. Make sure EVERYONE who 
operates, maintains or works near the PipeFeeder obeys the safety precautions. Do not 
risk injury or death by ignoring good safety practices. 
 

 

PipeFeeder owners must train operators before they operate the PipeFeeder. This 
training must be repeated at least annually. 

 

The operator must read, understand and obey all safety and operating instructions 
in the manual. 

 

 A person who has not read and understood all safety and operatinginstructions is 
not permitted to operate the PipeFeeder. 

 

Do not modify the equipment in any way. Unauthorized modification may impair 
the function and/or safety and could affect the life of the equipment, and persons. 

 

 Only use approved spare parts, and make sure they are only installed by authori-
zed technicians. 

Содержание PipeFeeder





















Отзывы: